[. . . ] It is designed for unobtrusive miking of speech and instruments, making it an excellent choice for use in many broadcast, stage performance, and presentation purposes. [. . . ] Its small size makes the RE92L ideal for theatre, interviews, public address systems, and houses of worship. The RE92L condenser element provides clear and natural sound reproduction. The RE92L includes an inline module for connection to any standard microphone input capable of supplying 24 to 48 Volt phantom power. The RE92L comes supplied with 4 feet of cable, both single and dual tie clasps, and a belt clip for the inline module with a nonreflecting black finish. Technical Specifications: Generation Element: Self-Biased condenser, back electret 2micron thick, gold sputtered diaphragm Frequency Response: 40 Hz to 20, 000 Hz (see chart) Polar Pattern: (see chart) Cardioid Sensitivity, Open Circuit 5. 6mV/Pascal Voltage, 1 kHz: Clipping Level (1% THD): >135 dB SPL Equivalent Noise: <30 dB SPL "A" weighted (0 dB=20 micropascals) Dynamic Range: >105 dB Signal to Noise (RE: 94 dB 64 dB SPL): Output Impedance, 1 kHz: 250 ohms Power Requirements: 12 to 52 Volt Phantom Power Current Consumption: < 8 ma with P12 supply Microphone Dimensions: Diameter = 0. 412" (10. 5 mm) Length = 0. 948" (24. 1 mm), less strain relief Inline Module Dimensions: Diameter = . 875" (22. 2 mm) Length = 5. 350" (135. 9 mm) Cable: 0. 100" (2. 54 mm) diameter x 4 ft (1. 2 m) long Polarity: Pin 2 positive, reference to pin 3, with positive pressure on the diaphragm Accessories Furnished: Two Stage Windscreen Single Tie Clip Dual Tie Clip Belt Clip for inline module Color: Nonreflecting black Environmental Conditions: Relative Humidity 0-50%: -29° to 74°C (-20° to 165°F) Relative Humidity 0-95%: -29° to 57°C (-20° to 135°F) Net Weight: 5. 6 oz. Typical locations are on the lapel, shirt collar, or on the shirt directly below the chin. You should avoid covering the microphone with any cloth, since this could change the frequency response characteristics of the microphone. If mechanical noise pickup from the cable is a problem, it can be minimized by looping the cable up and through the tie clip as shown. Dimensions: Inline Module Dimensions Microphone Dimensions 12000 Portland Avenue South, Burnsville, MN 55337 Phone:952/884-4051, Fax:952/884-0043 www. electrovoice. com © Telex Communications, Inc. For customer orders, contact Customer Service at: 800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. [. . . ] For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. [. . . ]